Switch2 controllers
 |
Separate control unit - high security |
|
Read in and read out |
|
|
Use PROXIMITY, CARDLOCK or TOUCHLOCK readers |
|
|
Card plus PIN |
|
|
Up to 50 codes or 10,000 card users |
|
|
Control over access by token colour |
|
|
Flexible voltage free relay output |
About - Switch2 is a single door control unit. The control unit stores the access permissions of the user and is mounted within the building. This makes the system suitable for high security applications.
Switch2 can be used with PROXIMITY, CARDLOCK or TOUCHLOCK readers. Switch2 can be installed to many doors over a site, all using the same tokens. Two readers can be connected to a single unit to give read in and read out access control.
Operation - The operation of Switch2 depends on the mode.
PROXIMITY and CARDLOCK. User tokens are valid and ready for use once installation is complete. Every user token is supplied with a corresponding shadow card. As user tokens are issued, the name of the user is marked on the shadow card. If a user is to be barred, or a user token is lost, the shadow card marked with the users" name is presented to all readers on site. This simple action invalidates the user token. Another user token may be issued for that user.
Additional features can be programmed using the PROXIMITY or CARDLOCK function card pack. These features include zoning which allows you to limit access by token colour.
TOUCHLOCK If a valid code is entered access is granted. Codes are changed via the keypad using the master code.
PROXIMITY KP keypad. Choose card + code, card + PIN, card only or code only.
Proximity readers - P series
|
|
Use with Switch2 or Net2 |
|
|
|
|
Simple mounting |
|
|
|
|
Read range up to 100mm with PROXIMITY cards |
|
|
|
|
Supplied with a choice of black or white fascias |
|
|
|
|
Low profile - less than 16mm deep |
|
|
|
|
4 sizes |
About - P series readers are for use with Switch2 and Net2 systems. The readers are supplied with a choice of black or white fascias. Other colours are available. Replacement fascias are available to Paxton Access registered installers free of charge. P series readers are available in four sizes.
Operation - A token is read by holding it within close proximity of the reader. Once a token has been read the control unit looks up the access permissions of that user. Access is then granted or denied as appropriate. If access is granted the green LED flashes. If access is denied the red LED flashes.
|
